COATINGS

Abrasion Resistant
ARVM-10091 is a UV curable screen coating formulated to provide a matte finish with excellent abrasion, chemical and block resistance. For use on PVC, PET, treated plastics as well as paper.

PTV-993 is a 100% reactive UV curable flexographic/gravure coating designed for use on PVC, PET and treated plastics as well as paper. PTV-993 provides a glossy finish with excellent abrasion, chemical and block resistance. PTV-993 can withstand prolonged steel wool abrasion with virtually no effect on the coating surface.

Paper Coating
CP-7491 is an FDA approved primer formulated for use on SBS and clay papers and boards
that are applied flexographically.

Heat Resistant
HRV-6541 is a 100% reactive UV curable flexographic coating designed for use on Foils, PET and other heat resistant plastics.  HRV-6541 is formulated to withstand temperatures over 350 F without dulling or discoloration of the foil or coating.

Foil Coating
LA-451 is a water based coating which can be used as a primer or topcoat for metallized surfaces, wet laminating adhesive for foil to board and papers or a heat sealable adhesive for foil to papers and board. 

Direct Food Contact Coatings
OFC-10041 is a water based overprint varnish formulated for direct food contact applications.  The OFC-10041 has good adhesion to most films and papers and can be used for any food and at any temperature.
FDA Status:
OFC-10041 complies with the Title 21 of the US Code of Federal Regulations (21CFR):
175.105
175.300
175.320
176.170
176.180

RCW-7431 is an FDA approved water based release coating formulated for use with low peel pressure sensitive adhesives.
RCW-7431 is approved for use under FDA regulations 21 CFR 175.300, 176.170 and 176.180.

Ink Jettable Coating
IJV-11381 is a 100% reactive UV curable ink jettable varnish.  The IJV provides:
- very low viscosity (especially when heated with Piezo type print heads)
- low surface tension for a smooth and glossy finish
- fast cure
- low volatility
- 0% VOC
- friendly EH&S profile
- hardness

UV Overprint Varnish
OPV-363 UV Overprint Varish is a 100% solids (0% VOC) UV curable flexographic varnish that provides high gloss, high slip, and chemical resistance.

UV Soft Touch Coating
STV-11333 is a 100% solids (0% VOC/0% Water) UV curable flexographic varnish that provides a luxurious soft touch feel, very low gloss and decreased slip.

STV-11333 will adhere to most card stock, films and foils used in the printing and converting industries.